The HFB Series 10/100M Auto-Sensing Ethernet to Fiber Optic Converter is designed using advanced fiber optic technology. This series transmit and receive 10/100 Mbps (no adjustment is required) data over two single-mode optical fibers, extending the Ethernet transmission distance from its normal few hundred meters to 0-120 kilometers. By using optical fiber as transmission media, this series continue to perform its secured, high-speed and long-distance communication even under the adverse condition such as lighting, power surge and electromagnetic interference; substantial saving on lighting and power surge protection equipments if copper wires were used.
The HFB Series is fully assembled using SMT components for stability and reliability.
1.1 Technical Specification
|
ETHERNET
|
|
Supporting standards
|
IEEE802.3 10Base-T, 100Base-T
|
|
Data Rate
|
10/100Mbps auto-sensing, Full Duplex or Half Duplex
|
|
Physical Interface
|
RJ45, DCE interface
|
|
OPTICAL
|
|
Number of Fibers
|
2
|
|
Wavelength
|
1310nm
|
|
Fiber Type
|
9/125μm(SM)
|
|
Distance
|
0 ~ 25km,0~40km,0~60km,0-80km
|
|
Connector Type
|
ST/FC/SC
|
|
GENERAL
|
|
Operating Temperature
|
-40 ~ 70˚C / -40 ~ +158ºF
|
|
Relative Humidity
|
0 ~ 95% non-condensing
|
|
Mean Time Between Failure (MTBF)
|
> 600,000hrs
|
|
Power Supply Adaptors
|
AC 220V 110v or DC+110V,+5V,+12V,+24V,+48V Option
|
|
Enclosure Color
|
Silver
|
|
Dimensions ( L×W×H )
|
25(L)×110(W)×36(H)Wall Mount & DIN Rail
|
|
Ethernet to Fiber Optic Converters